RenoNext
Price CheckStart Project
Aurora, OntarioYork Region

Electrical Cost in Aurora

Aurora electrical prices are 6% below the Ontario baseline. Expect to pay $2,344 – $4,688 per panel.

$2,344

Starting from

1-10 days

Typical timeline

10%

Contingency

$66,080

Max rebates

Electrical Cost Breakdown — Aurora

Scope (Aurora)LowHigh
Panel upgrade (100A to 200A)$2,344$4,688
Circuit addition (per circuit)$235$470
Full basement wiring$2,828$5,655
EV charger installation (Level 2)$1,418$2,835
Knob-and-tube rewiring (per floor)$4,675$9,350
Pot light installation (per light)$141$283

Visual Price Ranges

Panel upgrade (100A to 200A)

$2,344per panel$4,688

Circuit addition (per circuit)

$235per circuit$470

Full basement wiring

$2,828per project$5,655

EV charger installation (Level 2)

$1,418per charger$2,835

Knob-and-tube rewiring (per floor)

$4,675per floor$9,350

Pot light installation (per light)

$141per light$283

Labour vs Materials in Aurora

Labour

92%

of Toronto baseline

Labour costs in Aurora are 8% below Toronto rates due to lower overhead and competitive contractor markets.

Materials

97%

of Toronto baseline

Material costs are relatively stable across the GTA. Aurora sees 3% savings on materials compared to Toronto.

Permit Costs in Aurora

Aurora has competitive permit fees within York Region. Heritage overlay areas require additional approvals.

ESA Electrical Permit

Electrical Safety Authority

$88-$367

Full permit process

Available Rebates in Aurora

HST New Housing Rebate (Substantial Renovations)

CRA

Up to $16,080 HST rebate

If your renovation is classified as "substantial" (90%+ of interior removed/replaced), you may qualify for the federal GST/HST new housing rebate. Combined federal + Ontario portions can return up to $16,080 in tax.

Stackableactive

Ontario Renovates

Ontario Ministry of Municipal Affairs

Up to $25,000 forgivable loan

A forgivable loan for low-to-moderate income homeowners to make essential home repairs, accessibility modifications, or create a secondary suite. Delivered through local Service Managers.

Stackableactive

York Region Housing Support

York Region

Up to $25,000 forgivable loan

York Region delivers Ontario Renovates funding for secondary suite creation, essential repairs, and accessibility modifications. Available in Vaughan, Markham, Richmond Hill, Aurora, and Newmarket.

Stackableactive

Net Cost After Maximum Rebates

$0 – $0

Based on $66,080 in maximum stackable rebates. Actual amounts depend on eligibility and application.

See all rebates for Aurora

Phase-by-Phase Timeline

1

Site Assessment & Load Calculation

1-2 hours

Electrician inspects existing panel, service capacity, and wiring. Calculates total load (heating, cooling, appliances, lighting) to determine if you need a service upgrade. Identifies hazards: Federal Pacific panels (breakers don't trip), aluminum wiring, overloaded circuits, missing AFCI/GFCI protection.

2

ESA Permit Application

1-2 days processing

Electrician pulls ESA permit online (required for all work except device replacement). Permit costs $88-$367 depending on scope. ESA assigns inspection — inspector verifies code compliance after work is complete. Homeowner DIY work requires homeowner permit and two inspections (rough-in + final).

3

Material Procurement & Scheduling

1-3 days

Electrician orders panel, breakers, wire, boxes, devices. Schedules utility disconnect if replacing service mast or meter base. Coordinates with drywall/insulation trades if walls need opening. Books ESA inspection date after work completion.

4

Power Shut-Off & Execution

Varies by scope

Utility disconnects power at transformer (service upgrades) or electrician shuts main breaker (circuit work). Electrician installs new panel, pulls wire, makes connections, tests circuits. Panel upgrades take 4-8 hours. Whole-home rewiring takes 3-7 days with drywall repair.

5

ESA Inspection & Power Restoration

Inspection: 30-60 min

ESA inspector verifies code compliance: proper wire sizing, correct breaker types, grounding/bonding, AFCI/GFCI placement, box fill calculations. Pass = green sticker, power restored. Fail = deficiencies listed, re-inspection required ($88). Utility reconnects service.

What's Included vs Not Included

Typically Included

  • Licensed electrician labour (ESA certified)
  • Wire, connectors, and junction boxes
  • Outlets, switches, and cover plates
  • Circuit breakers
  • ESA inspection and certificate
  • Permit application

Not Included (Extra Cost)

  • Drywall patching after wire runs
  • Light fixtures (beyond basic)
  • Smart home wiring (Cat6, coax)
  • Generator installation and transfer switch
  • Meter base replacement (utility responsibility)
  • Trenching for underground runs

Electrical Costs in Nearby Cities

Money-Saving Tips

Bundle electrical with other renovation work — opening walls for framing saves re-work on wiring.

Upgrade to 200A panel during renovation — doing it later costs $2,000+ more.

Ask for arc-fault breakers (AFCI) on bedroom circuits — required by OBC and prevents fires.

LED pot lights cost more upfront but save $50-$100/year in electricity per fixture.

Always get the ESA certificate — insurance claims and resale require proof of permitted work.

Electrical Cost FAQs — Aurora

How much does electrical cost in Aurora?

Electrical in Aurora typically starts at $2,344 and ranges up to $4,688 per panel. Aurora prices are 6% below the Ontario baseline due to competitive contractor availability in York Region.

Do I need a permit for electrical in Aurora?

Permit requirements for electrical in Aurora follow York Region guidelines. Aurora has competitive permit fees within York Region. Heritage overlay areas require additional approvals.

How long does electrical take in Aurora?

Electrical in Aurora typically takes 1-10 days. Aurora project timelines can be affected by York Region permit processing times (typically 2-8 weeks) and seasonal demand. Plan ahead for spring and summer, when contractor availability is tighter.

Is electrical cheaper in Aurora than Toronto?

Yes, electrical in Aurora is typically 6% less than Toronto. Labour rates in York Region are lower and material costs are slightly lower, making Aurora a more affordable option for renovation work.

What should I budget for electrical contingency in Aurora?

We recommend a 10% contingency on top of your electrical estimate in Aurora. This covers unexpected conditions like hidden water damage, structural issues, or material price changes. For a project estimated at $4,688, set aside an additional $469.

shopping_cart

Shop Supplies for This Project

Browse tools, materials, and safety gear for your electrical project in Aurora.

Get a Electrical Quote in Aurora

RenoNext-verified contractors in Aurora are ready to quote your project. Real pricing, escrow-protected payments, proof-of-work documentation.